Show Ap-Group - Dell PowerConnect W-7200 Series Reference Manual

show ap-group

show ap-group [<ap-group>]
Description
Show settings for an AP group.
Syntax
Parameter
<ap-group>
Usage Guidelines
Issue this command without the optional <ap-group> parameter to display the entire AP group list, including
profile status for each profile. Include an AP group name to display detailed configuration information for that AP
group profile.
Example
This first example shows that the controller has nine configured AP groups. The Name column lists the names of all
configured AP groups. the Profile Status column indicates whether the AP group is predefined. (User-defined profiles
will not have an entry in the Profile Status column.)
(host) #show ap-group
AP group List
-------------
Name
----
corp-office
branch-office-am
corp
corp1
Corp1-AM
Corp1-AM-Ch11
Corp1-AM-Ch6
corp1-AP85
corp1-lab
Total: 9
Include an AP group name to display a complete list of configuration settings for that profile. The example below
shows settings for the AP group corp1.
(host) #show ap-group corp1
AP group "corp1"
-------------------
Parameter
---------
Virtual AP
Virtual AP
802.11a radio profile
802.11g radio profile
Wired AP profile
658 | show ap-group
Description
The name of an AP group.
Profile Status
--------------
Value
-----
corp1-guest
corp1-wpa2
default
profile1-g
default
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide