Dell PowerConnect W-7200 Series Reference Manual page 1050

Parameter
InMcastPkts
InBcastPkts
OutOctets
OutUcastPkts
OutMcastPkts
OutBcastPkts
#show interface port-channel 0 untrusted-vlan
Name: FE1/0
Untrusted Vlan(s)
The output of this command includes the following parameters:
Parameter
Name
Untrusted Vlan(s)
#show interface port-channel 0 xsec
xsec vlan 7 is ACTIVE
The output of this command includes the following parameters:
Parameter
xsec vlan 7 is
ACTIVE
Command History
Release
ArubaOS 3.4.1
ArubaOS 3.0.
Command Information
Platforms
All platforms
1050 | show interface port-channel
Description
Number of multicast packets received through the port.
Number of broadcast packets received through the port.
Number of octets sent through the port.
Number of unicast packets sent through the port.
Number of multicast packets sent through the port.
Number of broadcast packets sent through the port.
Description
Name of the specified port.
List of untrusted VLANs.
Description
This states that xsec is active on the specified port as well as the associated VLAN.
Modification
Modified to display LACP when applicable.
Command introduced.
Licensing
Base operating system
Command Mode
Enable or config mode on master controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide