Dell PowerConnect W-7200 Series Reference Manual page 285

Arubaos 6.2
Hide thumbs Also See for PowerConnect W-7200 Series:
Table of Contents

Advertisement

Parameter
eap-rate-time-interval
fata-jack-quiet-time
invalid-address-combination-
quiet-time
malformed-association-request-
quiet-time
malformed-auth-frame-quiet-time
malformed-htie-quiet-time
malformed-large-duration-quiet-
time
no
omerta-quiet-time
omerta-threshold
overflow-eapol-key-quiet-time
overflow-ie-quiet-time
power-save-dos-min-frames
power-save-dos-quiet-time
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
received within the EAP rate time interval to
trigger an alarm.
Time, in seconds, during which the
configured number of EAP handshakes must
be received to trigger an alarm.
Time to wait, in seconds, after detecting a
FATA-Jack attack after which the check can
be resumed.
Time to wait, in seconds, after detecting an
invalid address combination after which the
check can be resumed.
Time to wait, in seconds, after detecting a
malformed association request after which
the check can be resumed.
Time to wait, in seconds, after detecting a
malformed authentication frame after which
the check can be resumed.
Time to wait, in seconds, after detecting a
malformed HT IE after which the check can
be resumed.
Time to wait, in seconds, after detecting a
large duration for a frame after which the
check can be resumed.
Negates any configured parameter.
Time to wait, in seconds, after detecting an
Omerta attack after which the check can be
resumed.
The Disassociation packets received by a
station as a percentage of the number of
data packets sent, in an interval of 10
seconds.
Time to wait, in seconds, after detecting a
overflow EAPOL key request after which the
check can be resumed.
Time to wait, in seconds, after detecting a
overflow IE after which the check can be
resumed.
The minimum number of Power
Management OFF packets that are required
to be seen from a station, in intervals of 10
second, in order for the Power Save DoS
check to be done.
Time to wait, in seconds, after detecting a
Power Save DoS attack after which the
Range
Default
1-120
3 seconds
seconds
60-360000
900
seconds
seconds
60-360000
900
seconds
seconds
60-360000
900
seconds
seconds
60-360000
900
seconds
seconds
60-360000
900
seconds
seconds
60-360000
900
seconds
seconds
60-360000
900
seconds
seconds
1-100
10%
60-360000
900
seconds
seconds
60-360000
900
seconds
seconds
1-1000
120
60-360000
900
seconds
seconds
ids dos-profile | 285

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powerconnect w-series

Table of Contents