Dell PowerConnect W-7200 Series Reference Manual page 190

cluster-member-factory-cert
cluster-member-factory-cert member-mac <mac>
Description
This command sets the controller as a control plane security cluster root, and specifies a custom user-installed
certificate for authenticating cluster members.
Syntax
Parameter
<mac>
Usage Guidelines
If your network includes multiple master controllers each with their own hierarchy of APs and local controllers, you
can allow APs from one hierarchy to failover to any other hierarchy by defining a cluster of master controllers. Each
cluster will have one master controller as its cluster root, and all other master controllers as cluster members.
To define a controller as a cluster root, issue one of the following commands on that controller:
cluster-member-custom-cert: Define the controller as a cluster root, and select a user-installed certificate to
l
authenticate that cluster member.
cluster-member-factory-cert: Define the controller as a cluster root, and select a factory-installed certificate to
l
authenticate that cluster member.
cluster-member-ip
l
member.
NOTE: For information on installing certificates on your controller, refer to the Management Utilities chapter of the Dell
PowerConnect W-Series ArubaOS User Guide .
Example
The following command sets the controller on which you issue command as a root controller, and adds the
controller172.21.18.18 as a cluster member with the IPsec key ipseckey1:
(host) (config) #cluster-member-factory-cert member-mac 00:1E:37:CB:D4:52
Related Commands
Parameter
control-plane-security
show cluster-config
show cluster-switches
190 | cluster-member-factory-cert
Description
MAC address of the user-installed certificate on the cluster member
: Define the controller as a cluster root, and set the IPsec key to authenticate that cluster
Description
Configure the control plane security profile.
Show the multi-master cluster configuration for the control plane
security feature.
Issue this command on a master controller using control plane
security in a multi-master environment to show other the other
controllers to which it is connected.
Mode
Config mode
Enable mode
Enable mode
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide