Dell PowerConnect W-7200 Series Reference Manual page 786

Column
Interface
Echo Sent
Echo Recv
Probe Req
Probe Resp
Assoc Req
Assoc Resp
Assoc Fail
Link up/down
Resel.
Switch
Other Mgmt
Command History
Introduced in ArubaOS 3.0.
Command Information
Platforms
All platforms
786 | show ap mesh debug counters
Description
Indicates whether the mesh interface connects to a Parent AP or a Child AP. Each row of data in
the Mesh Packet Counters table shows counter values for an individual interface.
Number of echo packets sent.
Number of echo packets received.
Number of probe request packets sent from the interface specified in the Mesh-IF parameter.
Number of probe response packets sent to the interface specified in the Interface parameter.
Number of association request packets from the interface specified in the Interface parameter.
Number of association response packets from the interface specified in the Interface parameter.
This number includes valid responses and fail responses.
Number of fail responses received from the interface specified in the Interface parameter.
Number of times the link up or link down state has changed.
Number of times a mesh point attempted to reselect a different mesh portal.
Number of times a mesh point successfully switched to a different mesh portal.
Management frames of any type other than association and probe frames, either received on child
interface, or sent on parent interface.
Licensing
This show command is available in
the base operating system.
Commands to configure the mesh
feature require the Mesh license.
Command Mode
Enable or Config mode on master controllers.
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide