Dell PowerConnect W-7200 Series Reference Manual page 395

license
license {add <key>|del <key>|export <filename>|import <filename>|report <filename>}
Description
This command allows you to install, delete, and manage software licenses on the controller.
Syntax
Parameter
add
del
export
import
report
Usage Guidelines
Obtain an Dell software license certificate from your Dell sales representative or authorized reseller. Use the
certificate ID and the system serial number to obtain a software license key which you install in the controller.
NOTE: Users that are not very familiar with this procedure may wish to use the License Management page in the WebUI to install
and manage licenses on the controller.
Example
The following command adds a license key on the controller:
license add 890BobXs-cVPCb3aJ-7FbCijhZ-BuQPtuI4-RjLJW6Pl-n5K
Command History
Introduced in ArubaOS 3.0
Command Information
Platform
Available on all platforms
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Installs the software license key in the controller. The key is normally sent to you via email.
Removes the software license key from the controller. The key is normally sent to you via email.
Exports the license database on the controller to the specified file in flash.
Replaces the license database on the controller with the specified file in flash.
The system serial numbers referenced in the imported file must match the numbers on the controller.
Saves a license report to the specified file in flash.
License
Available in the base operating system
Command Mode
Enable mode on master and local
controllers
license | 395