Table of Contents
Advertisement
Parameter
Match-Str
Priority
Attribute
Operation
Operand
Action
Value
Related Commands
Command
aaa server-group
Command History
This command was introduced in ArubaOS 3.0.
622 | show aaa server-group
Description
starts-with – The rule is applied if and only if the attribute value returned starts with the
l
string in parameter Operand.
ends-with – The rule is applied if and only if the attribute value returned ends with the
l
string in parameter Operand.
equals – The rule is applied if and only if the attribute value returned equals the string
l
in parameter Operand.
not-equals – The rule is applied if and only if the attribute value returned is not equal to
l
the string in parameter Operand.
value-of – This is a special condition. What this implies is that the role or VLAN is set to
l
the value of the attribute returned. For this to be successful, the role and the VLAN ID
returned as the value of the attribute selected must be already configured on the
controller when the rule is applied
This is the string to which the value of the returned attribute is matched.
The priority in which role or VLAN derivation rules are applied. Rules at the top of the list
are applied before rules at the bottom.
For role or VLAN derivation rules, this is the attribute returned by the authentication server
that is examined for Operation and Operand match.
For role or VLAN derivation rules, this is the match method by which the string in Operand
is matched with the attribute value returned by the authentication
server.
contains – The rule is applied if and only if the attribute value contains the string in
l
parameter Operand.
starts-with – The rule is applied if and only if the attribute value returned starts with the
l
string in parameter Operand.
ends-with – The rule is applied if and only if the attribute value returned ends with the
l
string in parameter Operand.
equals – The rule is applied if and only if the attribute value returned equals the string
l
in parameter Operand.
not-equals – The rule is applied if and only if the attribute value returned is not equal to
l
the string in parameter Operand.
value-of – This is a special condition. What this implies is that the role or VLAN is set to
l
the value of the attribute returned. For this to be successful, the role and the VLAN ID
returned as the value of the attribute selected must be already configured on the
controller when the rule is applied.
For role or VLAN derivation rules, this is the string to which the value of the returned
attribute is matched.
This parameter identifies whether the derivation rule sets a server group role (set role) or a
VLAN (set vlan).
Sets the user role or VLAN ID to be assigned to the client if the rule condition is met.
Description
Use
aaa server-group
in the output of this show command.
to configure the settings displayed
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Mode
Config mode
Advertisement
Table of Contents
