configure terminal
configure terminal
Description
This command allows you to enter configuration commands.
Syntax
No parameters.
Usage Guidelines
Upon entering this command, the enable mode prompt changes to:
(host) (config) #
To return to enable mode, enter Ctrl-Z or exit.
Example
The following command allows you to enter configuration commands:
(host) # configure terminal
Command History
This command was introduced in ArubaOS 3.0.
Command Information
Platforms
All platforms
196 | configure terminal
Licensing
Base operating system
Command Mode
Enable mode on master controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide