Dell PowerConnect W-7200 Series Reference Manual page 711

R = Remote AP; I = Inactive; X = Maintenance Mode; P = PPPoE AP
S = RFprotect Sensor; d = Disconnected Sensor; H = Using 802.11n license
M = Mesh node; Y = Mesh Recovery i = Indoor; o = Outdoor
Total APs:15
Related Commands
Command
show ap database-summary
Command History
Version
ArubaOS 3.0
ArubaOS 6.2
Command Information
Platforms
All platforms
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
To display a more general summary overview of the
AP registered to a controller, use the command
ap database-summary.
Modification
Command introduced
The usb parameter was introduced
Licensing
Base operating system
Mode
Enable and Config
show modes
Command Mode
Enable or Config mode on master controllers
show ap database | 711