Dell PowerConnect W-7200 Series Reference Manual page 1013

show ids dos-profile
show ids dos-profile <profile-name>
Description
Show an IDS Denial Of Service (DoS) Profile
Syntax
Parameter
<profile-name>
Usage Guidelines
Issue this command without the <profile-name > parameter to display an IDS DoS profile.
Examples
The example below shows that the controller has four configured DoS profiles.
((host) (config) #show ids dos-profile
IDS Denial Of Service Profile List
----------------------------------
Name
----
default
test
test1
Wizard-test
Wizard-test2
Total:5
In the example above, the Reference column indicates the number of references to the profile named in the Name
column. The Profile Status column is blank unless the rule is predefined.
The example below displays a partial output for the profile "test1".
(host) (config) #show ids dos-profile test1
Parameter
---------
Detect Disconnect Station Attack
Disconnect STA Assoc Response Theshold
Disconnect STA Deauth and Disassoc Theshold
Disconnect STA Detection Quiet Time
Spoofed Deauth Blacklist
Detect AP Flood Attack
AP Flood Threshold
AP Flood Increase Time
AP Flood Detection Quiet Time
Detect Client Flood Attack
Client Flood Threshold
Client Flood Increase Time
Client Flood Detection Quiet Time
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Name of an IDS DoS profile.
References Profile Status
---------- --------------
4
0
1
1
1
Value
-----
true
5
8
900 sec
Disabled
false
50
3 sec
900 sec
false
150
3 sec
900 sec
show ids dos-profile | 1013