Dell PowerConnect W-7200 Series Reference Manual page 832

Parameter
descending
start
switch <switch-ip-
addr>
Example
The output of the command shows that the AP is aware of five other access points, three of which are active.
(host) #show ap radio-database
AP Radio Database
-----------------
Name
Mode/Chan/EIRP/Cli
----
-------------
mp3
/10/0/0
sw-ad-ap124-11
/10/0/0
sw-ad-ap125-13
/10/2.5/0
sw-ad-ap65-19
Flags: U = Unprovisioned; N = Duplicate name; G = No such group; L = Unlicensed
R = Remote AP; I = Inactive; X = Maintenance Mode; P = PPPoE AP; B = Built-in AP
S = RFprotect Sensor; d = Disconnected Sensor; H = Using 802.11n license
M = Mesh node; Y = Mesh Recovery
The output of this command includes the following information:
Column
Name
Group
AP Type
IP address
Status
Flags
Switch IP
11g Mode/Chan/EIRP/Cli
832 | show ap radio-database
Description
Sort the output in descending order.
Start displaying the output of this command at a chosen index number by entering the
index number of the AP at which command output should start.
Display information for APs associated with a specific controller by entering the IP
address of that controller.
Group AP Type IP Address
11a Mode/Chan/EIRP/Cli
----- ------- ----------
----------------------
default 125 10.3.129.96
AP(HT)/100/4/0
default 124 10.3.129.99
AP(HT)/100+/2/0
default 125 10.3.129.98
AP(HT)/100/4/0
default 65 10.3.129.95
Description
Name of the AP.
AP group to which the AP is associated.
AP model type.
IP address of the AP.
Current AP status. If the AP is currently up, this data column also shows the
amount of time for which the AP has been active.
This column displays a letter that corresponds to some type of additional
information for the AP. The key to the list of possible flags appears at the bottom of
the output of this command.
IP address of the AP's controller.
802.1g radio type and mode/802.11g radio channel used by the AP/current Effective
Status Flags
------ -----
Up 14h:45m:0s M
Up 14h:43m:18s M
Up 14h:49m:36s M
Down
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Switch IP 11g
--------- ---------
10.3.129.232 AP(HT)
10.3.129.232 AP(HT)
10.3.129.232 AP(HT)
10.3.129.232