Dell PowerConnect W-7200 Series Reference Manual page 984

show esi ping
show esi ping [ping-name <ping-name>]
Description
Show settings for ESI ping health check attributes.
Syntax
Parameter
ping-name <ping-name>
Example
This example below shows that the controller has three defined sets of ping attributes.
(host) #show esi groups
ESI Ping Table
--------------
Name Frequency (sec)
---- ---------------
ping_att1
ESIping
ESIping2
The output of this command includes the following information:
Column
Name
frequency
timeout
retry-count
ID
Num Groups
Related Commands
Platforms
esi ping
984 | show esi ping
Description
Include the optional ping-name <ping-name> parameters to display settings for one
specified set of ping settings.
Timeout (sec)
-------------
5
5
50000
Description
Name of a group of ping settings.
Specifies the ping frequency in seconds.
Specifies the ping timeout in seconds.
Specifies the ping retry count
ID number assigned to the ping attributes when that set of attributes was defined.
Number of ESI groups to which this set of ping attributes is assigned.
Licensing
This command specifies the ESI ping
health check configuration.
Retry Count ID Num Groups
----------- -- ----------
2
2
2
Command Mode
Config mode on master or local controllers.
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
2 0 1
2
2
1 0
2 2