Dell PowerConnect W-7200 Series Reference Manual page 860

Column
Channel
Known APs
UnKnown APs
Channel Util (%)
Max AP Signal
(dBm)
Max Interference
(dBm)
SNIR (db)
Related Commands
Command
ap spectrum local-override
rf dot11a-radio-profilemodespectrum-
mode
rf dot11g-radio-profilemodespectrum-
mode
Command History
Introduced in ArubaOS 6.0.
Command Information
Platforms
All platforms
860 | show ap spectrum channel-summary
Description
An 802.11a or 802.11g radio channel.
Number of valid APs identified on the radio channel.
Number of invalid or rogue APs identified on the radio channel.
Percentage of the channel currently in use.
Signal strength of the AP that has the maximum signal strength on a channel.
Signal strength of the non-Wi-Fi device that has the highest signal strength.
The ratio of signal strength to the combined levels of interference and noise on that channel. This
value is calculated by determining the maximum noise-floor and interference-signal levels, and
then calculating how strong the desired signal is above this maximum.
Description
Convert an AP or AM into a spectrum
monitor by adding it to the spectrum local-
override list.
Set a 802.11a radio so the device operates
as an spectrum monitor, and can send
spectrum analysis data to a desktop or
laptop client.
Set a 802.11g radio so the device operates
as an spectrum monitor, and can send
spectrum analysis data to a desktop or
laptop client.
Licensing
Base operating system
Mode
Config mode on master or local
controllers
Config mode on master or local
controllers
Config mode on master or local
controllers
Command Mode
Enable or Config mode on master or local
controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide