Dell PowerConnect W-7200 Series Reference Manual page 848

show ap remote debug flash-config
show ap remote debug flash-config {ap-name <ap-name>|bssid <bssid>|ip-addr <ip-addr>} acls|
{vap <vap>|vaps
Description
Show the remote AP configuration stored in flash memory.
Syntax
Parameter
ap-name <ap-name>
bssid <bssid>
ip-addr <ip-addr>
acls
vap <vap>
vaps
Example
The output of this command can be used to debug problems with a remote AP. The command below shows
statistics for an AP with the IP address
(host) #show ap remote debug flash-config ip-addr 192.0.2.64 acls
Offline ACLs
------------
Item
----
Native VLAN
DHCP VLAN
DHCP ADDR
DHCP POOL NETMASK
DHCP POOL START
DHCP POOL END
DHCP DNS SERVER
DHCP ROUTER
DHCP DNS DOMAIN
DHCP LEASE
Session ACL
Session ACL Name
Session ACL Count
Session Aces
ACL 1
ACL 1 Name
ACL 1 Count
Aces 1
...
848 | show ap remote debug flash-config
Description
Show debugging data for an AP with a specific name.
Show data for a specific Basic Service Set Identifier (BSSID) on an AP. The Basic Service
Set Identifier (BSSID) is usually the AP's MAC address.
Show data for an AP with a specific IP address by entering its IP address in dotted-decimal
format.
Display ACLs of offline Virtual APs (VAPs).
Display the configuration of a specific offline VAP by entering the name of an VAP.
Display the current number of offline VAPs.
192.0.2.64.
Value
-----
1
N/A
0.0.0.0
mycompany
0
N/A
N/A
N/A
N/A
1
logon
21
16 1 4294
192.168.11.2
192.168.11.254
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
192.168.11.1
192.168.11.1