Dell PowerConnect W-7200 Series Reference Manual page 248

enable bypass
enable bypass
no enable bypass
Description
This config mode command allows you to bypass the enable password prompt and go directly to the privileged
command mode.
Usage Guidelines
Use this command when you want to access the privileged mode directly after logging in to the controller and not be
prompted to enter an enable mode password.
To restore the enable mode password prompt, use the config mode command.
Example
The following example allows bypass the enable mode password prompt.
(host) #configure terminal
Enter Configuration commands, one per line. End with CNTL/Z
(host) (config) #enable bypass
(host) (config) #
Command History
Version
ArubaOS 6.0
Command Information
Platform
Available on all platforms
248 | enable bypass
Modification
Command introduced
License
Available in the base operating system
no enable bypass
Command Mode
Config mode on master or local
controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
.