Dell PowerConnect W-7200 Series Reference Manual page 852

show ap remote debug r1_key
show ap remote debug r1_key [ap-name <ap-name> | bssid <bssid> | ip-addr <ip-addr>]
Description
This command displays all the r1 keys that are stored in an AP.
Syntax
Parameter
ap-name <ap-name>
bssid <bssid>
ip-addr <ip-addr>
Examples
Use this command to view all the r1 keys that are stored in an AP. You can filter the output based on the AP name,
BSSID, or IP address.
(host) #show ap remote debug r1_key ap-name MAcage-105-GL
Stored R1 Keys
--------------
Station MAC
-----------
00:50:43:21:01:b8
93 31 bd 44 58 fe fe 6a ad aa 1d d7 29 94 fb 5b 7c 15 76 66 d2 1f
Command History
Introduced in ArubaOS 6.2.
Command Information
Platforms
All platforms
852 | show ap remote debug r1_key
Description
Show debugging information for a specific AP.
Show debugging information for a specific Basic Service Set Identifier (BSSID). The Basic
Service Set Identifier (BSSID) is usually the AP's MAC address
Show debugging information for an AP with a specific IP address by entering its IP address
in dotted-decimal format.
Mobility Domain ID Validity Duration
------------------ -----------------
1 3568
Licensing
Base operating system
R1 Key
------
(32): 94 ff 18 0a 5f 47 8b 3e 95 2b
Command Mode
Enable mode on master controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide