Dell PowerConnect W-7200 Series Reference Manual page 426

logging
logging <ipaddr>[facility]|[severity]|[type>]
Description
Use this command to specify the IP address of the remote logging server, facility, severity, and the type.
Syntax
Parameter
facility
severity
type
Usage Guidelines
The local use facilities (local0, local1, local2, local3, local4, local5, local6, and local7) are not reserved for specific
message-generating sources, and can be used for sending syslog messages. Use the
that the device sends logging messages.
Example
The following command adds the remote logging server with the IP address 10.1.2.3 with a user log type using local4.
(host) (config) #logging 1.1.1.1 user facility local4
Command History
Introduced in ArubaOS 6.0
Command Information
Platform
Available on all platforms
426 | logging
Description
To set the remote logging server facility.
To set the remote logging server severity.
To set the remote logging server message type.
License
Available in the base operating system
Range Default
local 0 to —
local7
— —
— —
show logging
Command Mode
Config mode on master controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
command to verify