Dell PowerConnect W-7200 Series Reference Manual page 783

show ap mesh-cluster-profile
show ap mesh-cluster-profile [<profile>]
Description
Show configuration settings for a mesh cluster profile.
Syntax
Parameter
<profile>
Usage Guidelines
The command show ap mesh-cluster-profile displays a list of all mesh cluster profiles configured on the controller,
including the number of references to each profile and each profile's status. Include the optional <profile>
parameter to show detailed settings for an individual mesh cluster profile.
Examples
The example below shows the configuration settings for the mesh cluster profile "meshcluster2".
(host) #show ap mesh-cluster-profile meshcluster2
Mesh Cluster profile "meshcluster2"
------------------------------
Parameter
---------
Cluster Name
RF Band
Encryption
WPA Hexkey
WPA Passphrase
The output of this command includes the following information:
Parameter
Cluster Name
RF band
Encryption
WPA Hexkey
WPA Passphrase
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Name of a mesh cluster profile
Value
-----
company-mesh
a
opensystem
N/A
N/A
Description
Name of the mesh cluster using this profile
The RF band in which the AP should operate:
g = 2.4 GHz
l
a = 5 GHz
l
Data encryption setting for the mesh cluster profile.
opensystem—No authentication and encryption.
l
wpa2-psk-aes—WPA2 with AES encryption using a preshared key.
l
The WPA pre-shared key (only for mesh cluster profiles using WPA2 with AES encryption).
The WPA password that generates the preshared key (only for mesh cluster profiles using
WPA2 with AES encryption).
show ap mesh-cluster-profile | 783