Usage Guidelines - Dell PowerConnect W-7200 Series Reference Manual

show ap packet-capture status
show ap packet-capture status <ap-name|ip-addr|ip6-addr>
Description
This command shows detailed packet capture (PCAP) session information for Dell APs.
Syntax
Parameter
ap-name
ip-addr
ip6-addr

Usage Guidelines

This is the show version for the ap packet-capture commands, used to direct an Dell AP to send packet captures to a
client packet capture utility such as Airmagnet, Wireshark and so on, on a remote client.
Example
#show ap packet-capture status ap-name ap1
Packet Capture Sessions at ap1, IP 10.3.44.167
----------------------------------------------
pcap-id filter
------- ------
1 type eq all
max-pkt-size
------------
65536
Related Commands
For a complete list of packet capture (pcap) commands and usage guidelines, see
Command History
Version
ArubaOS6.2
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
AP name for which you are requesting packet capture status information.
IP address of the AP for which you are requesting packet capture status information.
IP6 address of the AP for which you are requesting packet capture status information.
type
----
interactive
num-pkts status
-------- ------
3759 in-progress
Change
Name changed from pcap to ap packet capture.
intf channel max-pkts
---- ------- --------
6c:f3:7f:ba:65:70 153
url target Radio ID
------ ------
192.168.0.3/5555 0
0
ap packet-capture .
show ap packet-capture status | 821