Dell PowerConnect W-7200 Series Reference Manual page 890

show ap spectrum monitors
show ap spectrum monitors
Description
This command shows a list of APs terminating on the controller that are currently configured as spectrum monitors
or hybrid APs
Syntax
No parameters
Examples
The output of this example shows that the 802.11a radio on a spectrum monitor named ap123 is sending spectrum
analysis data to a client with the IP address 10.240.16.177.
(host)#show ap spectrum monitors
List of Sensors
---------------
AP name
Subscribe Time
-------
--------------
00:24:6c:c0:0c:89
10.240.16.177
00:24:6c:c0:0c:89
2011-01-21 07:17:57 AM
00:24:6c:c7:d6:1c
10.240.16.177
07:18:22 AM
The output of this command includes the following information:
Column
AP name
Group
Ap Type
Phy
Band
Mode
Client IP
Subscribe time
Command History
Introduced in ArubaOS 6.0.
890 | show ap spectrum monitors
Group AP Type
----- -------
default 105
2011-01-21 07:09:32 AM
default 105
default 93
2011-01-21
Description
Name of an AP configured as a spectrum monitor or hybrid AP
Name of the spectrum device's AP group
the AP model number
The radio's PHY type. Possible values are A for 802.11a and G for 802.11b/g,
Spectrum band that the spectrum monitor or hybrid AP radio s currently monitoring.
This column shows whether the device is an access point configured as a hybrid AP, or
a spectrum monitor.
IP address of the client to which the spectrum monitor or hybrid AP is sending data.
Time at which the spectrum monitor or hybrid AP was connected to the client.
Phy Band Channel
--- ---- -------
G 2GHz 1
A 5GHz 44+
A 5GHz -
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Mode
---- -----
Access Point
Access Point 10.240.16.177
Spectrum Monitor