Dell PowerConnect W-7200 Series Reference Manual page 691

show ap config
show ap config {ap-group <ap-group>}|{ap-name <ap-name>}|{essid <essid>}
Description
Show a large list of configuration settings for an ap-group or an individual AP.
Syntax
Parameter
ap-group <ap-group>
ap-name <ap-name>
essid <essid>
Examples
The example output below shows just some of the configuration settings displayed in the output of this command.
show ap config ap-group apgroup14
---------------------------------------------------
Parameter
---------
LMS IP
"default"
Backup LMS IP
"default"
LMS Preemption
"default"
LMS Hold-down Period
"default"
Master controller IP address
"default"
RF Band
"default"
Double Encrypt
"default"
Native VLAN ID
"default"
SAP MTU
"default"
Bootstrap threshold
"default"
Request Retry Interval
"default"
Maximum Request Retries
"default"
Keepalive Interval
"default"
Dump Server
"default"
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Display configuration settings for an AP group.
Display configuration settings for an AP with a specific name.
Display configuration settings for an AP with a specific Extended Service Set Identifier
(ESSID). An Extended Service Set Identifier (ESSID) is a alphanumeric name that uniquely
identifies a wireless network. If the name includes spaces, you must enclose the ESSID in
quotation marks.
802.11g
-------
N/A
N/A
Disabled
600 sec
N/A
g
Disabled
1
N/A
8
10 sec
10
60 sec
N/A
802.11a Source
------- ------
N/A ap system-profile
N/A ap system-profile
Disabled ap system-profile
600 sec ap system-profile
N/A ap system-profile
g ap system-profile
Disabled ap system-profile
1 ap system-profile
N/A ap system-profile
8 ap system-profile
10 sec ap system-profile
10 ap system-profile
60 sec ap system-profile
N/A ap system-profile
show ap config | 691