Dell PowerConnect W-7200 Series Reference Manual page 794

show ap mesh-ht-ssid-profile
show ap mesh-ht-ssid-profile [<profile>]
Description
Show configuration settings for a mesh high-throughput Service Set Identifier (SSID) profile.
Syntax
Parameter
<profile>
Usage Guidelines
High-throughput APs support additional settings not available in legacy APs. A mesh high-throughput SSID profile
can enable or disable high-throughput (802.11n) features and 40 Mhz channel usage, and define values for aggregated
MAC protocol data units (MDPUs) and Modulation and Coding Scheme (MCS) ranges.
The command show ap mesh-ht-ssid-profile displays a list of all mesh high-throughput SSID profiles configured on
the controller, including the number of references to each profile and each profile's status. Include the optional
<profile> parameter to show detailed settings for an individual mesh high-throughput SSID profile.
Examples
The example below shows the configuration settings for the mesh high-throughput radio profile "default".
(host) #show ap mesh-ht-ssid-profile default
Mesh High-throughput SSID profile "default"
-------------------------------------------
Parameter
---------
40 MHz channel usage
BA AMSDU Enable
High throughput enable (SSID)
Legacy stations
Low-density Parity Check
Maximum number of spatial streams usable for STBC reception
Maximum number of spatial streams usable for STBC transmission
MPDU Aggregation
Max received A-MPDU size
Max transmitted A-MPDU size
Min MPDU start spacing
Short guard interval in 20 MHz mode
Short guard interval in 40 MHz mode
Supported MCS set
The output of this command includes the following information:
Column
40 MHz channel usage
794 | show ap mesh-ht-ssid-profile
Description
Name of a mesh high-throughput SSID profile.
Value
-----
Enabled
Enabled
Enabled
Allowed
Enabled
1
1
Enabled
65535 bytes
65535 bytes
8 usec
Enabled
Enabled
0-23
Description
This parameter shows if the profile enables or disables the
use of 40 MHz channels.
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide