Dell PowerConnect W-7200 Series Reference Manual page 278

ids ap-classification-rule change
id-classification-rule <rule-name>
check-min-discovered-aps
classify-to-type [neighbor | suspected-rogue]
clone
conf-level-incr
discovered-ap-cnt <discovered-ap-cnt>
match-ssids
no
snr-max <value>
snr-min <value>
ssid <ssid>
Description
Configure the AP classification rule profile.
Syntax
Parameter
<rule-name>
check-min-discovered-aps
classify-to-type
[neighbor | suspected-rogue]
clone
conf-level-incr
discovered-ap-cnt
<discovered-ap-cnt>
match-ssids
no
snr-max <value>
snr-min <value>
ssid <ssid>
Usage Guidelines
AP classification rule configuration is performed only on a master controller. If AMP is enabled via the mobility-
manager command, then processing of the AP classification rules is disabled on the master controller. A rule is
278 | ids ap-classification-rule change
Description
Enter the AP classification rule profile name.
Have the rule check for the minimum number of
APs
Specify if the type the AP will be classified,
neighbor or suspected-rogue, if the rule is
matched.
Copy data from another AP classification rule
profile
Increase the confidence level (in percentage)
when the rule matches
Enter the keyword discovered-ap-cnt followed
by the number of APs to be discovered.
Match SSIDs; match or do not match
Negates any configured parameter
Use the maximum SNR value
Use the minimum SNR value
Enter the keyword ssid followed by the SSID
string to be matched or excluded
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Range Default
— —
true true
false
— suspected-
rogue
— —
0-100 5
0-100 0
true false
false
— —
0-100 0
0-100 0
— —