Dell PowerConnect W-7200 Series Reference Manual page 830

Parameter
Password of AP so that AP can authenticate
to 802.1x using PEAP
Uplink VLAN
Usage Guidelines
The AP provisioning profile allows you to define a set of provisioning parameters to an AP group. These settings can
be saved or assigned to an AP group via the command ap-group <group> provisioning-profile <profile>.
Related Commands
Command
provision-ap
Command History
Release
ArubaOS 3.0
ArubaOS 6.0
Command Information
Platforms
All platforms
830 | show ap provisioning-profile
Description
Change provisioning parameters for an individual AP. This command does not save the
provisioning parameters settings in a reusable profile.
Modification
Command introduced
The uplink-vlan parameter was introduced.
Licensing
Base operating system
Description
If your AP uses PEAP authentication, this field displays the AP
password.
If you configured an uplink VLAN on an AP connected to a port
in trunk mode, the AP sends and receives frames tagged with
this VLAN on its Ethernet uplink.
By default, an AP has an uplink vlan of 0, which disables this
feature.
Command Mode
Config mode on master controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide