Dell PowerConnect W-7200 Series Reference Manual page 800

show ap mesh-radio-profile
show ap mesh-radio-profile [<profile>]
Description
Show configuration settings for a mesh radio profile.
Syntax
Parameter
<profile>
Usage Guidelines
The radio profile determines the radio frequency/channel used only by mesh nodes to establish mesh links. Mesh
nodes operating in different cluster profiles can share the same radio profile. Conversely, mesh portals using the same
cluster profile can be assigned different mesh radio profiles to achieve frequency separation.
The command show ap mesh-radio-profile displays a list of all mesh radio profiles configured on the controller,
including the number of references to each profile and each profile's status. Include the optional <profile>
parameter to show detailed settings for an individual mesh radio profile.
Example
The example below shows the configuration settings for the mesh cluster profile "default".
(host) #show ap mesh-radio-profile default
Mesh Radio profile "default"
----------------------------
Parameter
---------
802.11a Transmit Rates
802.11g Transmit Rates
Allowed VLANs on mesh link
BC/MC Rate Optimization
Heartbeat threshold
Link Threshold
Maximum Children
Maximum Hop Count
Mesh Private Vlan
Mesh High-throughput SSID Profile
Mesh Survivability
Metric algorithm
Rate Optimization for delivering EAPOL frames and mesh echoes
Reselection mode
Retry Limit
RTS Threshold
The output of this command includes the following information:
800 | show ap mesh-radio-profile
Description
Name of a mesh radio profile.
Value
-----
6 9 12 18 24 36 48 54
1 2 5 6 9 11 12 18 24 36 48 54
1-4094
Enabled
10
12
64
8
0
default
Disabled
distributed-tree-rssi
Disabled
startup-subthreshold
8
2333 bytes
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide