Dell PowerConnect W-7200 Series Reference Manual page 680

Column
auth
assoc
aid
1-int
essid
vlan-id
tunnel-id
phy
assoc. time
num assoc
flags
Command History
Introduced in ArubaOS 3.0.
Command Information
Platforms
All platforms
680 | show ap association remote
Description
This column displays a y if the AP has been configured for 802.11 authorization frame types.
Otherwise, it displays an n.
This column displays a y if the AP has been configured for 802.11 association frame types.
Otherwise, it displays an n.
802.11 association ID. A client receives a unique 802.11 association ID when it associates to
an AP.
Number of beacons in the 802.11 listen interval. There are ten beacons sent per second, so
a ten-beacon listen interval indicates a listen interval time of 1 second.
Name that uniquely identifies the AP's Extended Service Set Identifier (ESSID).
Identification number of the AP's VLAN.
Identification number of the AP's tunnel.
The RF band in which the AP should operate:
g = 2.4 GHz
a = 5 GHz
Amount of time the client has associated with the AP, in the format hours:minutes:seconds .
Number of clients associated with the AP.
This column displays any flags for this AP. The list of flag abbreviations is included in the
output of the show ap association remote command.
Licensing
Base operating system
Command Mode
Enable or Config mode on master controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide