Sending A Test Message; Configuring Administrator Contact Information - Dell DR4000 Administrator's Manual

FILE LOCATION: C:\Users\bruce_wylie\Desktop\Dell
Docs\~Sidewinder_Docs_DR4000\FRAME_Conversion_DR4000_AdminGuide\~DR4000_AG_F
The Email Alerts page is displayed, and a Deleted email recipient dialog is
displayed when successful.
6 To edit additional recipient email addresses, repeat steps 2 and 3. To delete
additional recipient email addresses, repeat steps 4 and 5.

Sending a Test Message

The DR4000 system provides a capability that lets you send test messages to
all of the recipient email addresses. This allows you to ensure that the process
for sending system alerts works, and that it reaches all of the email recipients
you have configured. To send a test message:
NOTE:
Ensure that you have or need a configured mail relay host. For more
information about relay hosts, see "Adding a Relay Host" on page 45.
1 Select System Configuration Email Alerts.
The Email Alerts page is displayed.
2 Click Send Test Message on the options bar.
The Send Email Alerts confirmation dialog is displayed.
3 Click OK (or click Cancel to display the Email Alerts page).
The Email Alerts page is displayed, and a Successfully sent email dialog is
displayed when successful.
4 Verify that all of the intended recipient email addresses received the test
email.

Configuring Administrator Contact Information

You should configure administrator contact information that identifies the
person who manages your DR4000 system. To do this, enter contact
information for the administrator using the Add Admin option (or edit
existing contact information by using the Edit Admin option) on the Email
Alerts page options bar.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 1 / 1 0 / 1 2 - F O R P R O O F O N LY
Configuring the DR4000 System Settings
43