At+Crsm Restricted Sim Access - Siemens MC35 Command Set

AT Command Set

4.43 AT+CRSM Restricted SIM access

Test command Response
AT+CRSM=?
OK
Write command
By using this command the TE has access to the SIM database. SIM access is
restricted to the commands which are listed below.
AT+CRSM=<com
mand>[,<fileId> As response to the command the ME sends the current SIM information pa-
[,<P1>,<P2>,<P3> rameters and response data. ME error result code +CME ERROR may be re-
[,<data>]]]
turned when the command cannot be passed to the SIM, but failure in the exe-
cution of the command in the SIM is reported in <sw1> and <sw2> parameters.
Response
+CRSM: <sw1>, <sw2> [,<response>]
OK / ERROR / +CME ERROR: <err>
Parameter
<command>
all other values are reserved; refer GSM 11.11.
<fileId>
<P1>,<P2>,<P3>
<data>
<sw1>, <sw2>
<response>
Reference Note
GSM 07.07
GSM 11.11
MC35_ATC_01_V05.00
176 READ BINARY
178 READ RECORD
192 GET RESPONSE
214 UPDATE BINARY
220 UPDATE RECORD
242 STATUS
integer type; this is the identifier for an elementary
data file on SIM. Mandatory for every command ex-
cept STATUS
integer type, range 0 - 255
parameters to be passed on by the ME to the SIM; re-
fer GSM 11.11.
information which shall be written to the SIM (hexa-
decimal character format)
integer type, range 0 - 255
status information from the SIM about the execution
of the actual command. These parameters are deliv-
ered to the TE in both cases, on successful or failed
execution of the command; refer GSM 11.11.
response of a successful completion of the command
previously issued (hexadecimal character format)
Page 127 of 256 15.07.2002