7
Diagnostics
7.1
Introduction
With certain operator input and if an error occurs in the processing, the
VS 130-2/VS 130-2vcr provides you with adequate diagnostic information. This can
take the following form:
•
Message from setup support
•
Message on the display of the processing unit
•
Activation of the "BF" LED
•
Slave Diagnostics
7.2
Diagnostics with Messages
Overview
A distinction is made between the following message types:
•
Error Messages
•
Warnings/Notes
•
Read results
All three types of message are displayed on the display of the processing unit.
Most messages of the error message type also trigger a diagnostic interrupt on the
DP master via PROFIBUS.
In "Error Messages", "Warnings/Notes" and "Read Results", you will find all the
messages, their meaning and a description of how to remedy the situation.
Vision Sensor SIMATIC VS 130-2/VS 130-2vcr
A5E00475759-01
7-1