Scale parameters and functions of the belt scale
8.8 Menu 1.6 Recovery / reset
tion
1.5.9.2 Speed simulation
Belt speed simu-
lation value
Start speed simu-
lation
Stop speed simu-
lation
8.8
Menu 1.6 Recovery / reset
1.6.1 Recovery point
Setting the recovery point in this menu creates an image of all settings of the weighing proces-
sor. Reloading is possible anytime and will overwrite the current settings.
Create recovery
point
Load recovery
point
Load standard
scale parameter
Load factory set-
tings
8.9
Menu 2.1 Messages
Opens the message log of the weighing electronic.
72
Enter the belt speed value to be simulated.
Start simulation
Stop simulation
Creates an image of all settings. Execution will not be acknowledged.
Loads the latest created image. Execution will not be acknowledged.
Like "Load factory settings", but interface settings for Ethernet and Mod-
bus RTU are not reset to the factory setting.
The command resets the SIWAREX to the "ex works" status. During this
process:
- all parameters and saved data (including protocol memory and logbook)
as well as the restore point are loaded with the default values
- all message buffers (diagnostics buffer, trace memory, etc.) are reset
SIWAREX WT241
Manual, 05/2015, A5E36046748A