Show Mpls - Extreme Networks ExtremeWare Command Reference Manual

show mpls

show mpls {vlan <vlan name>} {detail}
Description
Displays MPLS configuration information for one or all VLANs. Omitting the vlan keyword displays
information for all VLANs.
Syntax Description
vlan name
detail
Default
N/A.
Usage Guidelines
When the
vlan
parameters that apply to the entire switch, the current status of peer LSRs, and a list of the VLANs for
which MPLS is enabled.
When the
vlan
configuration parameters that are specific to the VLAN.
If the optional
Example
The following command displays MPLS configuration information for the VLAN accounting:
show mpls vlan accounting
History
This command was first available in an ExtremeWare IP Technology Services Release based on
v6.1.8b12.
This command was subsequently incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on the BlackDiamond switch only.
ExtremeWare Software 7.0.0 Command Reference Guide
Specifies a VLAN name.
Specifies to display the information in detailed format.
parameter is omitted, this command displays the values of all MPLS configuration
parameter is specified, this command displays the current values of the MPLS
keyword is specified, additional detailed VLAN information is displayed.
detail
show mpls
1413