Show Gvrp - Extreme Networks ExtremeWare Command Reference Manual

VLAN Commands

show gvrp

show gvrp
Description
Displays the current configuration and status of GVRP.
NOTE
This command is available only on the "i" series switches running ExtremeWare 6.0 or earlier.
Syntax Description
This command has no arguments or variables.
Default
N/A
Usage Guidelines
GVRP is not supported in ExtremeWare version 6.1 or later.
Example
The following shows results of this command:
GVRP running (866422):
GVRP transmit 0 receive 0
Enabled for Tx/Rx on ports:
10111213141516171819
20212223242526272829
303132
VLAN/Ports (t=static tagged, u=static untag, G=GVRP tagged, g=GVRP untag)
Default (Tag 1)
uuuuuuuuuu..uuu..uuuuuuuuuuuuuuu
Mgmt (Tag 4094)
................................
nat (Tag 4093)
................................
History
This command was first available in ExtremeWare 2.0.
This command exists but is not supported in ExtremeWare version 6.1 or later.
Platform Availability
This command is available only on the "i" series platforms running ExtremeWare version 6.0 or earlier.
394
JoinTime 20 LeaveTime 200
tx errors 0 rx errors 0
123456789
LeaveAllTime 1000 cs
int errors 0
ExtremeWare 7.5 Command Reference Guide