Uninstalling The Measurements Driver; Hardware Removal - Extreme Networks Summit WMScanner User Manual

Summit WMScanner Overview
NOTE
If some other driver (say card manufacturer's driver) has been installed prior to running the installer then, then the
installer will create a backup of the old driver before installing the new driver. The old driver will be restored when
the driver will be uninstalled. The installer may or may not ask for a computer restart.

Uninstalling the Measurements Driver

To uninstall the measurements driver:
1 Go to the Windows Control Panel.
2 Click on Add or Remove Programs.
3 Select the Windows Driver Package and Click on Change/Remove.
4 Click Yes.
The Measurement driver will now be uninstalled.

Hardware Removal

CAUTION
You should only remove the WLAN card adapter from your computer using the following hardware removal process.
Failure to follow this process could cause your computer to crash and may cause loss of data.
To remove hardware:
1 Ensure Summit WMScanner is not running
2 Double click the Safe Hardware Removal icon
3 Choose your Wireless LAN Adapter from the Safely Remove Hardware dialog box. Select Stop.
10
in the system tray.
Summit WMScanner Users Guide