Enable Slb Vip Svcdown-Reset - Extreme Networks ExtremeWare Command Reference Manual
Version 7.0.0
Hide thumbs
Also See for ExtremeWare:
- Command reference manual (2620 pages) ,
- Command reference manual (2546 pages) ,
- Command reference manual (2254 pages)
Table of Contents
Advertisement
SLB Commands
enable slb vip svcdown-reset
enable slb vip [all | <vipname>] svcdown-reset
Description
Enables svcdown-reset.
Syntax Description
all
vip name
Default
The svcdown-reset feature is disabled by default.
Usage Guidelines
The svcdown-reset feature configures the switch to send TCP RST packets to both the clients and the
virtual server if the virtual server fails a health-check.
To disable svcdown-reset, use the following command:
disable slb vip svcdown-reset
Example
The following command enables svcdown-reset for the virtual server "ftp_vip":
enable slb vip ftp_vip svcdown-reset
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all "i" series platforms.
478
Specifies all virtual servers.
Specifies a virtual server.
ExtremeWare Software 7.0.0 Command Reference Guide
Advertisement
Table of Contents
Need help?
Do you have a question about the ExtremeWare and is the answer not in the manual?