Portcfgcreditrecovery - Brocade Communications Systems Brocade 8/12c Command Reference Manual

22

portCfgCreditRecovery

portCfgCreditRecovery
Enables or disables credit recovery on a port.
SYNOPSIS
portcfgcreditrecovery --enable [slot/]port
portcfgcreditrecovery --disable [slot/]port
DESCRIPTION
Use this command to enable or disable credit recovery on a port.
The credit recovery feature enables credits or frames to be recovered. Only ports configured as long
distance ports can utilize the credit recovery feature. The default credit recovery configuration is enabled.
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
The Fabric OS port configuration commands are not supported on FCoE ports.
OPERANDS
This command has the following operands:
--disable
--enable
--help
EXAMPLES
To enable credit recovery on a port:
To disable credit recovery on a port:
SEE ALSO
portCfgShow
634
Disables credit recovery configuration on the specified port.
Enables credit recovery configuration on the specified port.
Displays the command usage.
switch:admin> portcfgcreditrecovery --enable 3/15
portcfgcreditrecovery --disable 3/15
Fabric OS Command Reference
53-1001764-01