Brocade Communications Systems StoreFabric SN6500B Reference page 903

XTUN-1006
Message
FCIP FC frame drop due to transmit timeout on slot=<FX8-24 Slot number (or 0 if
7800)> DP=<FX8-24 DP number (or 0 if 7800)> BLS=<Blaster Image Number (0 or 1)>
DR=<FC Descriptor Ring Number> Frames Dropped=<Number of FC frames that were
dropped>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that a Fibre Channel (FC) Send frame timeout occurred and the frames were dropped from the
SW queue.
Recommended
This error indicates that there is a slow draining device or a hung Blaster TX Descriptor Ring.
Action
XTUN-1007
Message
FCIP FC frame drop due to truncated receive on slot=<FX8-24 Slot number (or 0 if
7800)> DP=<FX8-24 DP number (or 0 if 7800)> BLS=<Blaster Image Number (0 or 1)>
DR=<FC Descriptor Ring Number> Frames Dropped=<Number of FC frames that were
dropped>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that a Fibre Channel (FC) Received frame event was posted, but the frame was dropped due to
an invalid receive length. This error occurs only on faulty hardware.
Recommended
Contact your vendor's customer support for assistance.
Action
XTUN-1996
Message
FTRACE buffer <FTRACE Trace Buffer Number> on slot <FX8-24 Slot Number> DP <FX8-24
DP Number> has been cleared.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that a CLI command or supportSave operation freed the trace buffer back into the FTRACE
free pool.
Recommended
No action is required.
Action
Fabric OS Message Reference
53-1002749-01
5
XTUN-1006
881