Brocade Communications Systems StoreFabric SN6500B Reference page 687

PSWP-1004
Message
Blade Swap complete for slots <slot number corresponding to the source blade> and
<slot number corresponding to the destination blade>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates the bladeSwap command has been issued.
Recommended
No action is required.
Action
PSWP-1005
Message
Blade Swap undo failed with error code <error code from undoBladeSwap>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates the bladeSwap command has not been undone.
Recommended
Use the portSwapShow command to display a list of currently swapped ports; then use the portSwap
Action command to achieve the desired result.
PSWP-1006
Message
Blade Swap failed on configInit with error code <error code from configInit> in
switch number <current switch number>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates the bladeSwap command failed on access to configuration data.
Recommended
Retry the command. If the failure persists, contact your switch service provider.
Action
Fabric OS Message Reference
53-1002749-01
5
PSWP-1004
665