Brocade Communications Systems StoreFabric SN6500B Reference page 434

5
FICN-1115
FICN-1115
Message
HostPrintEgr:CmdReject Sense Data Rcvd:Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> LastCmds=0x<Last 4 commands
received from the channel for this device> SenseData:Bytes0-0xB=0x<Bytes 0-3 of
sense data from the device><Bytes 4-7 of sense data from the device><Bytes 8-0x0b
of sense data from the device>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates an active Print emulation sequence received Command Reject Sense data from the device.
Recommended
If there was an unexpected job failure or I/O error associated with this event, contact your vendor's
Action customer support for assistance.
FICN-1116
Message
HostPrintEgr:AS Link Level Reject (LRJ) from CU Rx Path=0x<VEPortNumber HostDomain
HostPort DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> LastCmd=0x<Last 4
commands issued to this device from the channel> LastStatus=0x<Last 4 status
values sent to the channel from this device>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that a Link Level Reject (LRJ) was received from a device indicating that the Control Unit has
lost the logical path to the Logical Partition (LPAR).
Recommended
If this was an unexpected event; contact your vendor's customer support for assistance.
Action
FICN-1117
Message
HostPrintIng:FICON Cancel received Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> state=0x<the current emulation
state for this device>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates a job was canceled during Print write pipelining.
Recommended
If this was an unexpected event (cancel is normally an operator event), contact your vendor's customer
support for assistance.
Action
412
Fabric OS Message Reference
53-1002749-01