Brocade Communications Systems StoreFabric SN6500B Reference page 493

FW-1194
Message
<Port Name> <Label>, is above high boundary(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the number of state changes that the port experiences has risen above the high boundary.
The state of the port has changed for one of the following reasons: the port has gone offline, has come
online, is testing, is faulty, has become an E_Port, has become an F_Port, has segmented, or has
become a trunk port.
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
Action installation.
FW-1195
Message
<Port Name> <Label>, is between high and low boundaries(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the number of state changes that the port experiences has changed from a value outside
of the acceptable range to a value within the acceptable range. The state of the port has changed for one
of the following reasons: the port has gone offline, has come online, is testing, is faulty, has become an
E_Port, has become an F_Port, has segmented, or has become a trunk port.
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
Action installation.
FW-1196
Message
<Port Name> <Label>, value has changed(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the number of link resets that the port experiences has changed. Link resets occur due to
link timeout errors that indicate no frame activity.
Recommended
Check both ends of your cable connection. Verify if the cable and small form-factor pluggables (SFPs)
are faulty.
Action
Fabric OS Message Reference
53-1002749-01
5
FW-1194
471