5
CVLC-1004
CVLC-1004
Message
Forceful encryption LUN removal while re-key session is still active. Container:
<Target container name>, Initiator: <Initiator physical WWN>, LUN ID: <LUN ID>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the encryption LUN was forcefully removed while a re-key session was still active.
Recommended
No action is required.
Action
CVLC-1005
Message
There are no LUNs found from the target. Container: <Target container name>,
Initiator: <Initiator physical WWN>, LUN ID: <LUN ID>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that there are no LUNs found from the target-initiator pair.
Recommended
No action is required.
Action
CVLC-1006
Message
Duplicate LUN serial number <LUN SN> found. Container: <Target container name>,
Initiator: <Initiator physical WWN>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that there is more than one LUN serial number discovered from the same target. Therefore,
encryption on this target is disabled.
Recommended
No action is required.
Action
246
Fabric OS Message Reference
53-1002749-01
Need help?
Do you have a question about the StoreFabric SN6500B and is the answer not in the manual?