Brocade Communications Systems StoreFabric SN6500B Reference page 695

RCS-1004
Message
Application(<application name>) not registered.(<error string>).
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the specified application did not register with reliable commit service (RCS).
Recommended
Run the haShow command to view the HA state.
Action
Run the haDisable and haEnable commands.
Run the rcsInfoShow command to view RCS capability on the fabric. RCS is supported in Fabric OS
v2.6, v3.1 and later, and v4.1 and later.
Run the firmwareDownload command to upgrade the firmware for any switches that do not support
RCS.
RCS-1005
Message
Phase <RCS phase>, <Application Name> Application returned <Reject reason>,
0x<Reject code>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that a receiving switch is rejecting the specified reliable commit service (RCS) phase.
Recommended
If the reject is in the acquire change authorization (ACA) phase, wait for several minutes and then retry
Action the operation from the sender switch.
If the reject is in the stage fabric configuration (SFC) phase, check if the application license exists for the
local domain and if the application data is compatible.
RCS-1006
Message
State <RCS phase>, Application <Application Name> AD<Administrative Domain>, RCS
CM. Domain <Domain ID that sent the reject> returned 0x<Reject code>. App Response
Code <Application Response Code>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the specified domain rejected a reliable commit service (RCS) phase initiated by an
application on the local switch.
•
•
Fabric OS Message Reference
53-1002749-01
If the reject phase is acquire change authorization (ACA), the remote domain may be busy and
could not process the new request.
If the reject phase is stage fabric configuration (SFC), the data sent by the application may not
be compatible or the domain does not have the license to support that application.
5
RCS-1004
673