HSL-1003
Message
SFP for interface <InterfaceName> is removed.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that a small form-factor pluggable (SFP) transceiver has been removed from the specified
interface.
Recommended
No action is required.
Action
HSL-1004
Message
Incompatible SFP for interface <InterfaceName> is detected.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that an incompatible small form-factor pluggable (SFP) transceiver for the interface has been
inserted.
Recommended
Disable the interface using the shutdown command and insert an SFP transceiver that is supported on
Action
the interface. After the SFP transceiver is inserted, re-enable the interface using the no shutdown
command.
HSL-1005
Message
Failed to initialize with FSS.
Message Type
LOG
Severity
CRITICAL
Probable Cause
Indicates a failure to initialize the Fabric OS State Synchronization (FSS) service. This error is caused by
other system errors.
Recommended
Execute the errShow command to view the error log for other system errors, and take appropriate
Action
corrective actions.
Fabric OS Message Reference
53-1002749-01
5
HSL-1003
569