Brocade Communications Systems StoreFabric SN6500B Reference page 152

5
AG-1027
AG-1027
Message
Unable to handle this login request on port <port number> because NPIV capability
is not enabled on this port.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that N_Port ID virtualization (NPIV) is not enabled on the specified port.
Recommended
Execute the portCfgNpivPort command on the Access Gateway switch to enable the NPIV capability on
Action the port.
AG-1028
Message
Device with Port WWN <port_name> tried to perform fabric login through port
<f_port>, without having access permission.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the device does not have login access for the specified port as per Advanced Device
Security (ADS) policy set by the user.
Recommended
Add the device to the ADS allow list for the specified port using the ag --adsadd command.
Action
AG-1029
Message
Port Group (ID: <pgid>) has ports going to different fabrics.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates a misconfiguration.
Recommended
Connect all ports in the port group to the same fabric.
Action
130
Fabric OS Message Reference
53-1002749-01