Brocade Communications Systems StoreFabric SN6500B Reference page 175

Brocade fabric os message reference v7.1.0 (53-1002749-01, march 2013)
Hide thumbs Also See for StoreFabric SN6500B:
Table of Contents

Advertisement

Recommended
Reset the secret value using the secAuthSecret command.
Action
Reinitialize authentication using the portDisable and portEnable commands or the switchDisable and
switchEnable commands.
If the message persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.
AUTH-1032
Message
Failed to generate <data type> for <message payload> payload: length <data
length>, error code <error code>, port <port number>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the authentication process failed to generate specific data (challenge, nonce, or response
data) for an authentication payload. This usually relates to internal failure.
A nonce is a single-use, usually random value used in authentication protocols to prevent replay attacks.
Usually this problem is transient. The authentication may fail.
Recommended
Reinitialize authentication using the portDisable and portEnable commands or the switchDisable and
Action
switchEnable commands.
If the message persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.
AUTH-1033
Message
Disable port <port number> due to unauthorized switch <switch WWN value>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that an entity was not configured in the Switch Connection Control (SCC) policy and tried to
connect to the port.
Recommended
Add World Wide Name (WWN) of the entity to the SCC policy and reinitialize authentication by using the
portDisable and portEnable commands or the switchDisable and switchEnable commands.
Action
AUTH-1034
Message
Failed to validate name <entity name> in <authentication message>: port <port
number>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the specified entity name in the payload is not in the correct format.
Fabric OS Message Reference
53-1002749-01
5
AUTH-1032
153

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fabric os v7.1.0

Table of Contents