Brocade Communications Systems StoreFabric SN6500B Reference page 489

FW-1182
Message
<Port Name> <Label>, is above high boundary(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the number of invalid cyclic redundancy checks (CRCs) that the port experiences has risen
above the high boundary. This error generally indicates a deteriorating fabric hardware.
Recommended
Check your small form-factor pluggables (SFPs), cables, and connections for faulty hardware. Verify that
Action all optical hardware is clean.
FW-1183
Message
<Port Name> <Label>, is between high and low boundaries(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the number of invalid cyclic redundancy checks (CRCs) that the port experiences has
changed from a value outside of the acceptable range to a value within the acceptable range. Frequent
fluctuations in CRC errors generally indicate an aging fabric.
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
Action installation.
Check your small form-factor pluggables (SFPs), cables, and connections for faulty hardware. Verify that
all optical hardware is clean.
FW-1184
Message
<Port Name> <Label>, value has changed(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the percentage of incoming traffic that the port experiences has changed.
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
Action
Fabric OS Message Reference
53-1002749-01
5
FW-1182
467