Brocade Communications Systems StoreFabric SN6500B Reference page 650

5
NBFS-1003
NBFS-1003
Message
DB_XMIT_SET flag not set in state <current state name>, input <state name>, port
<portnumber>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates the database transmit set flag was not set for the specified input state on the specified port.
Neighbor finite state machine (NBFSM) states are as follows:
•
•
•
•
•
•
Recommended
No action is required. The Fabric OS automatically recovers from this problem.
Action
NBFS-1004
Message
Wrong input: <state name> to neighbor FSM, state <current state name>, port
<portnumber>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates the wrong input was sent to the neighbor finite state machine (NBFSM). NBFSM states are as
follows:
•
•
•
•
•
•
If this error occurs repeatedly, then there is a problem in the protocol implementation between two
switches.
Recommended
Run the nbrStateShow command to check the neighbor state of the port listed in the message. If it is
Action Full, then this message can safely be ignored. Otherwise, run the portDisable and portEnable
commands to refresh the port.
628
0 - Down
1 - Init
2 - Database Exchange
3 - Database Acknowledge Wait
4 - Database Wait
5 - Full
0 - Down
1 - Init
2 - Database Exchange
3 - Database Acknowledge Wait
4 - Database Wait
5 - Full
Fabric OS Message Reference
53-1002749-01