Brocade Communications Systems StoreFabric SN6500B Reference page 547

FW-1447
Message
Switch status change contributing factor Core Blade: <Number Bad> Core blade
failures (<Switch State>).
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the switch is not in a healthy state. This occurred because the number of core blade
failures is greater than or equal to the policy set by the switchStatusPolicySet command.
Recommended
Replace the faulty core blade.
Action
FW-1448
Message
Switch status change contributing factor Error ports: <Number of Error ports>
Error out of <Total number of ports> ports:config(<Percentage configured>
percent,<Actual threshold limit>). (Port(s) <port list>).
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the switch is not in a healthy state. This occurred because the number of faulty ports is
greater than or equal to the policy set by the switchStatusPolicySet command. A port is faulted
because of port segmentation or port disable.
Recommended
Execute the switchShow command to know the reason for port segmentation and port disable. Take the
Action necessary action to bring the port up.
FW-1500
Message
Mail overflow - Alerts being discarded.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the mail alert overflow condition has occurred.
Recommended
Resolve or disable the mail alert using the fwMailCfg command.
Action
Fabric OS Message Reference
53-1002749-01
5
FW-1447
525