Brocade Communications Systems StoreFabric SN6500B Reference page 789

SEC-3048
Message
FIPS mode has been enabled in the system using force option.
Message Type
AUDIT
Class
SECURITY
Severity
INFO
Probable Cause
Indicates the system has been forced to Federal Information Processing Standards (FIPS) mode.
Recommended
Verify the security event was planned. If the security event was planned, no action is required. If the
Action security event was not planned, take appropriate action as defined by your enterprise security policy.
Look for the status of the prerequisites that did not conform to FIPS mode.
SEC-3049
Message
Status of bootprom access is changed using fipscfg CLI to : <Access Status>.
Message Type
AUDIT
Class
SECURITY
Severity
INFO
Probable Cause
Indicates the status of boot PROM access has changed using the fipsCfg command.
Recommended
No action is required.
Action
SEC-3050
Message
Event: <Event Name>, Status: success, Info: <Event Specific Info>
Message Type
AUDIT | LOG
Class
SECURITY
Severity
INFO
Probable Cause
Indicates the specified Secure Shell (SSH) utility operation was performed.
Recommended
Verify the security event was planned. If the security event was planned, no action is required. If the
Action security event was not planned, take appropriate action as defined by your enterprise security policy.
Fabric OS Message Reference
53-1002749-01
5
SEC-3048
767