Brocade Communications Systems StoreFabric SN6500B Reference page 810

5
SPC-3011
SPC-3011
Message
S<slot number containing Encryption Engine>, <module name>: Persistent data
storage error: <SP status code>, KEK: <KEK octet 1> <KEK octet 2> <KEK octet 3>
<KEK octet 4>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that an attempt to store CryptoModule internal data using the Secret Encryption Key failed;
most likely, the encryption engine has been zeroized or tampered with.
Recommended
Execute the cryptocfg --initEE and cryptocfg --regEE commands, and then recover or restore the
Action needed primary and secondary KEKs.
SPC-3012
Message
S<slot number containing Encryption Engine>, <module name>: Persistent data
retrieval error: <SP status code>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that an attempt to read CryptoModule internal data using the Secret Encryption Key failed;
most likely, the encryption engine has been zeroized or tampered with.
Recommended
Execute the cryptocfg --initEE and cryptocfg --regEE commands, and then recover or restore the
Action needed primary and secondary KEKs.
SPC-3013
Message
S<slot number containing Encryption Engine>, <module name>: SEK generation
failure: <SP status code>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the CryptoModule internal Secret Encryption Key could not be generated.
Recommended
Contact your switch service provider for assistance.
Action
788
Fabric OS Message Reference
53-1002749-01