Brocade Communications Systems StoreFabric SN6500B Reference page 353

FCOE-1014
Message
Request to add ports to VLAN <vid> failed.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that a request to add ports to the specified VLAN has failed.
Recommended
Execute the supportSave command and restart the system. If the problem persists, contact your switch
Action service provider.
FCOE-1015
Message
Request to add MACs to Layer 2 for ifindex 0x<ifindex> failed, rc:<reason code>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that a request to add MAC entries to Layer 2 for the specified slot or port has failed.
Recommended
Check the reason code for the failure and contact your switch service provider for assistance.
Action
FCOE-1016
Message
Request to delete VLAN <vid> failed.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates a request to delete the specified VLAN has failed because the VLAN may be in use.
Recommended
Disable the active FCoE login session using the no fcoe command and try deleting the VLAN again.
Action
FCOE-1017
Message
Request to add FCMAP failed for VLAN <vid>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that a request to add FCMAP has failed. When the VLAN is in use, its FCMAP cannot be
modified.
Fabric OS Message Reference
53-1002749-01
5
FCOE-1014
331